5ちゃんねる ★スマホ版★ ■掲示板に戻る■ 全部 1- 最新50  

■ このスレッドは過去ログ倉庫に格納されています

おまえの hddparm -tT 教えてください。

1 :login:Penguin:01/10/07 18:10 ID:8G/SeCEs
bash# cat /proc/ide/hda/model
TOSHIBA MK6015MAP
/dev/hda:
Timing buffer-cache reads: 64 MB in 0.55 seconds =116.36 MB/sec
Timing buffered disk reads: 32 MB in 2.44 seconds =13.11 MB/sec

bash-2.05# cat /proc/ide/hda/model
FUJITSU MPG3409AT E
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.04 seconds =123.08 MB/sec
Timing buffered disk reads: 64 MB in 2.35 seconds = 27.23 MB/sec

bash-2.05# cat /proc/ide/hdc/model
IBM-DPTA-372050
/dev/hdc:
Timing buffer-cache reads: 128 MB in 1.01 seconds =126.73 MB/sec
Timing buffered disk reads: 64 MB in 2.94 seconds = 21.77 MB/sec

143 :login:Penguin:03/01/09 03:50 ID:WLJuqPrv
>>169

  マスコミだって商売だから、最終的には保身に走る。
  政治屋なんかもっと怪しいじゃん(w。

 個人情報保護法案の時にも、一番ウハウハなのは汚職しまくりで崖っぷちの政治屋だなんて
言われてたよね。

 まぁ、ぴろゆきの個人サイトだから・・・と言われれば2ちゃんにそこまで社会的意義を
求めるのも酷なんだろうけどさ(w。

 これからは豚キムの事を、「親愛なる指導者同志」って書かなければ、聡連から命を狙われる
かと思うと(((( ;゚Д゚)))ガクガクブルブル

 でつな(w。


144 :login:Penguin:03/01/10 08:55 ID:CqGam1as
Timing buffer-cache reads: 128 MB in 0.48 seconds =266.67 MB/sec
Timing buffered disk reads: 64 MB in 1.59 seconds = 40.25 MB/sec

遅いと思ってたけど、ここ見るとそうでもないみたいだな。
UT2003とかでテクスチャレベルを最高にするとテクスチャ読み込むのが遅すぎてサーバ側から切断される。
これはメモリが足りないせいなのかな。256しか積んでないからな。

145 :login:Penguin:03/01/10 11:40 ID:iyykYYz/
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: ATLAS10K3_18_WLS Rev: 020K
Type: Direct-Access ANSI SCSI revision: 03

hdparm -tT /dev/sda
/dev/sda:
Timing buffer-cache reads: 128 MB in 0.17 seconds =752.94 MB/sec
Timing buffered disk reads: 64 MB in 1.27 seconds = 50.39 MB/sec

146 :login:Penguin:03/01/12 22:02 ID:vg6JVWvq
安定しないため、あえてスピード落としてる人っていますか?

ウチだと
80芯ケーブル
hda: WDC WD400AB-00BVA0(40ギガ)
hdb: ST340810A(40ギガ)
40芯ケーブル
hdc: cdrom
で、1日1回完全フリーズ、たまに突然再起動。

80芯ケーブル
hda: ダミーの850Mボロディスク
hdb: ST340810A
40芯ケーブル
hdc: cdrom
hdd: WDC WD400AB-00BVA0
で、安定です。

hdaのWDC WD400AB-00BVA0をumda2くらいに落としてやれば安定するような気がす
るのですが。

電源の最悪値はとりあえず置いておいて下さい。



147 :山崎渉:03/01/15 11:26 ID:/OP2L6bf
(^^)

148 : ◆GarNeT/IDA :03/01/23 13:04 ID:Ow2BQYIc
/dev/hda:

Model=FUJITSU MPG3409AT E, FwRev=82C4, SerialNo=VH06T170K5AM
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80063424
IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5

Timing buffer-cache reads: 128 MB in 1.60 seconds = 80.00 MB/sec
Timing buffered disk reads: 64 MB in 2.49 seconds = 25.70 MB/sec

149 :宗男の秘書 ◆MUNEOH/q9U :03/01/26 17:14 ID:XMVXpT94
/dev/hdb:

Model=FUJITSU MPF3204AT, FwRev=0028, SerialNo=05086825
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=40031712
IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 1 2 3 4 5

Timing buffer-cache reads: 128 MB in 0.32 seconds =400.00 MB/sec
Timing buffered disk reads: 64 MB in 2.78 seconds = 23.02 MB/sec

2.4.20 + Con Kolivas patch for 2.4.20 + ReiserFS
これからhdparmで性能をアップしていくぞ

150 :login:Penguin:03/01/26 20:55 ID:ahNjS9Yg
>>148
バッファキャッシュの値が小さすぎるような…
hdpram実行時にsuspicious云々なメッセージ出ませんでした?


151 :login:anonymous:03/01/26 21:28 ID:RB0X8qDO
マシン:EPIA-C800 MEM:256M
OS:DEBIAN 3.0

/dev/hdb:

Model=MAXTOR 4K080H4, FwRev=A08.1500, SerialNo=674117721182
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=2000kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301487
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=disabled
Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5

Timing buffer-cache reads: 128 MB in 1.96 seconds = 65.31 MB/sec
Timing buffered disk reads: 64 MB in 8.93 seconds = 7.17 MB/sec

+++++++++++++++

EDENって66MがMAXでしたっけ・・・?100まで使えたような気がしたんですが。
まぁ用途が家鯖なので全然問題ないんですが(笑

152 :login:anonymous:03/01/26 21:29 ID:RB0X8qDO
もう1台

マシン:DURON750+K7SEM
OS:赤帽8.0

/dev/hda:

Model=Maxtor 2F040L0, FwRev=VAM51JJ0, SerialNo=F12B8AKE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80293248
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): 1 2 3 4 5 6 7

Timing buffer-cache reads: 128 MB in 1.03 seconds =123.89 MB/sec
Timing buffered disk reads: 64 MB in 2.17 seconds = 29.49 MB/sec

153 :login:anonymous:03/01/26 21:30 ID:RB0X8qDO
上のマシンのもう1台のHDD

/dev/hdb:

Model=IC35L060AVER07-0, FwRev=ER6OA44A, SerialNo=SZ0SZ062567
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=120103200
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 2 3 4 5

Timing buffer-cache reads: 128 MB in 1.04 seconds =122.73 MB/sec
Timing buffered disk reads: 64 MB in 2.64 seconds = 24.27 MB/sec

154 :login:Penguin:03/01/26 21:30 ID:wlra5F/E
$ hddparm -tT
bash: hddparm: command not found

155 :初期設定まんま:03/01/27 08:45 ID:0WB64lwM
[root@localhost root]# /sbin/hdparm -itT /dev/hda

/dev/hda:

Model=Maxtor 98196H8, FwRev=ZAH814Y0, SerialNo=V80SXMXC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160045200
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 0: 1 2 3 4 5 6

Timing buffer-cache reads: 128 MB in 0.72 seconds =178.58 MB/sec
Timing buffered disk reads: 64 MB in 2.28 seconds = 28.03 MB/sec


156 :148 ◆garnetkKQ2 :03/01/31 19:43 ID:dDR/5UKJ
>>150
でませんでしたよ〜。

もう一度やってみますた。
Timing buffer-cache reads: 128 MB in 1.63 seconds = 78.53 MB/sec
Timing buffered disk reads: 64 MB in 2.25 seconds = 28.44 MB/sec

157 :login:Penguin:03/02/16 00:11 ID:LjDtqsXB
nForce2マザー(K7N2G-L)買ったんでやってみました。

VineSeed標準のkernel-2.4.20-0vl14だと

/dev/hda:
Timing buffered disk reads: 64 MB in 18.20 seconds = 3.52 MB/sec

という悲惨な状態だったのでいろいろ調べた結果、カーネルにACパッチの
patch-2.4.21-pre4-ac4.bz2をあてて、カーネルパラメータに
ide0=ata66を指定することで

/dev/hda:
Timing buffered disk reads: 64 MB in 1.80 seconds = 35.56 MB/sec

まで出ました。感動。

158 :login:Penguin:03/03/21 17:39 ID:6s6tsuw3
VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
hda: ST38410A, ATA DISK drive
hda: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=16708/16/63, UDMA(33)

# hdparm -i /dev/hda
/dev/hda:
Model=ST38410A, FwRev=3.03, SerialNo=6CS1JE84
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=512kB, MaxMultSect=32, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16841664
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5

# hdparm -m16 -c1 -u1 -d1 -tT /dev/hda
/dev/hda:
setting 32-bit I/O support flag to 1
setting multcount to 16
setting unmaskirq to 1 (on)
setting using_dma to 1 (on)
multcount = 16 (on)
I/O support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
Timing buffer-cache reads: 128 MB in 3.13 seconds = 40.89 MB/sec
Timing buffered disk reads: 64 MB in 5.31 seconds = 12.05 MB/sec

159 :login:Penguin:03/03/21 18:11 ID:flz8uT9g
# hdparm -itT /dev/hda

/dev/hda:

Model=TOSHIBA MK3004GAH, FwRev=JB001A, SerialNo=13830056T
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=46
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=58595040
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5

Timing buffer-cache reads: 128 MB in 1.20 seconds =106.67 MB/sec
Timing buffered disk reads: 64 MB in 4.17 seconds = 15.35 MB/sec


160 :login:Penguin:03/03/21 22:11 ID:0UpeekfY
/dev/hda:
Model=Maxtor 6Y080L0, FwRev=YAR41VW0, SerialNo=Y3HXS84E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive Supports : ataATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ATA-7

Timing buffer-cache reads: 128 MB in 0.34 seconds =376.47 MB/sec
Timing buffered disk reads: 64 MB in 1.33 seconds = 48.12 MB/sec


161 :login:Penguin:03/04/15 18:27 ID:I8lYX1jC
/dev/hda:

Model=Maxtor 5T060H6, FwRev=TAH71DP0, SerialNo=
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117187500
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 0: 1 2 3 4 5 6

Timing buffer-cache reads: 128 MB in 1.16 seconds =110.34 MB/sec
Timing buffered disk reads: 64 MB in 1.78 seconds = 35.96 MB/sec


162 :山崎渉:03/04/17 12:13 ID:KRn99/cy
(^^)

163 :山崎渉:03/04/20 06:08 ID:xFRXxEWb
   ∧_∧
  (  ^^ )< ぬるぽ(^^)

164 : ◆garnetGnNk :03/05/13 10:44 ID:hzndneRN
ぉぉ?

/dev/hda:

Model=FUJITSU MPG3409AT E, FwRev=82C4, SerialNo=VH06T170K5AM
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80063424
IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5

Timing buffer-cache reads: 128 MB in 1.09 seconds =117.43 MB/sec
Timing buffered disk reads: 64 MB in 18.53 seconds = 3.45 MB/sec

165 :名無しさん@Emacs:03/05/15 12:35 ID:myPKxNw+
>163
ガッ

>164
MPG3049ATE 。。。ガクガクブルブル。。。


166 :山崎渉:03/05/22 02:17 ID:p4opmoqv
━―━―━―━―━―━―━―━―━[JR山崎駅(^^)]━―━―━―━―━―━―━―━―━―

167 :山崎渉:03/05/28 16:56 ID:3t6i6zxR
     ∧_∧
ピュ.ー (  ^^ ) <これからも僕を応援して下さいね(^^)。
  =〔~∪ ̄ ̄〕
  = ◎――◎                      山崎渉

168 :山崎 渉:03/07/15 11:31 ID:2JhhXBQM

 __∧_∧_
 |(  ^^ )| <寝るぽ(^^)
 |\⌒⌒⌒\
 \ |⌒⌒⌒~|         山崎渉
   ~ ̄ ̄ ̄ ̄

169 :login:Penguin:03/07/16 07:55 ID:ocabZ7Sv
/dev/hda:

Model=ST3160023A, FwRev=3.06, SerialNo=
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: 1 2 3 4 5 6

Timing buffer-cache reads: 128 MB in 1.07 seconds =119.63 MB/sec
Timing buffered disk reads: 64 MB in 1.17 seconds = 54.70 MB/sec


170 :login:Penguin:03/07/16 21:22 ID:nLcaJQSH
>>123
やったけどならなかったよ?

171 :login:Penguin:03/07/17 23:31 ID:6vnV9sJK
/dev/hda:

Model=IC35L080AVVA07-0, FwRev=VA4OA52A, SerialNo=VNC402A4GGNWAA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-2 ATA-3 ATA-4 ATA-5

Timing buffer-cache reads: 128 MB in 0.87 seconds =147.13 MB/sec
Timing buffered disk reads: 64 MB in 1.42 seconds = 45.07 MB/sec

172 :login:Penguin:03/07/22 05:05 ID:I3nBCmGh
Abit NF7-SのSATA(SilliconImage3112A)接続

Model=WDC WD360GD-00FNA0
Timing buffer-cache reads: 128 MB in 0.23 seconds =556.52 MB/sec
Timing buffered disk reads: 64 MB in 1.17 seconds = 54.70 MB/sec

Model=Maxtor 6Y060L0 (SERILLEL2利用)
Timing buffer-cache reads: 128 MB in 0.23 seconds =556.52 MB/sec
Timing buffered disk reads: 64 MB in 1.34 seconds = 47.76 MB/sec

hdg: sata_error = 0x00000000, watchdog = 0, siimage_mmio_ide_dma_test_irq
ってのがコンソールにワンサカでてくるな。
siimage.cで#if 1で括ってあるprintk()を取っ払ってしまえば良さげではあるが..


173 :login:Penguin:03/07/22 06:54 ID:i5QAQTAY
=== [ ▼PR ] =========================================================
獲得ページにて毎日ポイント獲得!広告すると毎日のポイント増えるかも!?
http://wwa.irias.co.jp/?WCI=Home&WCE=242081
======================================================== [ ▲PR ] ====


174 :ぼるじょあ ◆yBEncckFOU :03/08/02 05:14 ID:+QUfMouI
     ∧_∧  ∧_∧
ピュ.ー (  ・3・) (  ^^ ) <これからも僕たちを応援して下さいね(^^)。
  =〔~∪ ̄ ̄ ̄∪ ̄ ̄〕
  = ◎――――――◎                      山崎渉&ぼるじょあ

175 :login:Penguin:03/09/11 14:16 ID:sY+OAyIi
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2VTRHCE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): 1 2 3 4 5 6 7

Timing buffer-cache reads: 128 MB in 0.13 seconds =984.62 MB/sec
Timing buffered disk reads: 64 MB in 1.13 seconds = 56.64 MB/sec

176 :login:Penguin:03/09/12 16:27 ID:GWYQvEI8
# hdparm -tT /dev/hda

/dev/hda:
read() failed: Input/output error
Timing buffered disk reads: read() failed: Input/output error

・・・(´Д`;)

177 :login:Penguin:03/09/12 19:31 ID:aTyG287s
# hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.22 seconds =581.82 MB/sec
止まってしまった、、

% ps auxww|grep hdparm
root 31075 0.0 0.1 2352 1468 pts/1 D 18:26 0:00 /sbin/hdparm -tT /dev/hda
どうすればいいんだ??

178 :login:Penguin:03/10/02 00:25 ID:xW6QM91G
Dで止まったら、お手上げさぁね。

179 : :03/10/04 09:16 ID:Nfmh/6DN
>>177-178
kill してもダメ?

180 :にゃんまげ太郎:03/12/02 15:11 ID:E/+Z5ele
/dev/hda:

Model=FUJITSU M2724TA, FwRev=7604, SerialNo=06115464
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=3162/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=16
CurCHS=3162/16/63, CurSects=3187296, LBA=yes, LBAsects=3187836
IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
AdvancedPM=no
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3

Timing buffer-cache reads: 128 MB in 2.62 seconds = 48.85 MB/sec
Timing buffered disk reads: 64 MB in 18.30 seconds = 3.50 MB/sec

181 :login:Penguin:03/12/03 14:29 ID:Fo5Xevvy
遅い(゚Д゚)ゴルァ

/dev/hde:

Model=HDS722512VLSA80, FwRev=V33OA60A, SerialNo=VNRC3EC3C415DK
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7938kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=241254720
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing buffer-cache reads: 1632 MB in 2.00 seconds = 814.90 MB/sec
Timing buffered disk reads: 96 MB in 3.01 seconds = 31.91 MB/sec


182 :login:Penguin:03/12/05 02:08 ID:59Oj9Tqs
1年半前のノートだからあまり速くない
/dev/hda:

Model=TOSHIBA MK4018GAP, FwRev=M0.03 A, SerialNo=12R64684T
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=46
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78140160
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

Timing buffer-cache reads: 648 MB in 2.01 seconds = 322.60 MB/sec
Timing buffered disk reads: 64 MB in 3.07 seconds = 20.87 MB/sec


183 :Seagateマンセー:03/12/22 21:45 ID:3ytf6VG9
/dev/hda:

Model=ST340016A, FwRev=3.05, SerialNo=3HS0CVGL
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

Timing buffer-cache reads: 1020 MB in 2.00 seconds = 510.00 MB/sec
Timing buffered disk reads: 124 MB in 3.04 seconds = 40.79 MB/sec

184 :Seagateマンセー:03/12/22 21:45 ID:3ytf6VG9
/dev/hdb:

Model=ST380011A, FwRev=3.04, SerialNo=3JV00Q8V
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

Timing buffer-cache reads: 1004 MB in 2.00 seconds = 502.00 MB/sec
Timing buffered disk reads: 168 MB in 3.01 seconds = 55.81 MB/sec

185 :login:Penguin:03/12/22 21:46 ID:3ytf6VG9
_| ̄|○
そこまで速いというわけでもなかったのね…

186 :login:Penguin:04/01/17 23:43 ID:RKIrLYDw
Model=IC35L080AVVA07-0, FwRev=VA4OA52A, SerialNo=VNC402A4CP9LRA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:

* signifies the current active mode

Timing buffer-cache reads: 1520 MB in 2.00 seconds = 760.00 MB/sec
Timing buffered disk reads: 138 MB in 3.04 seconds = 45.39 MB/sec
なぜか udma3 udma4 udma5 が出ないけど,UDMA(100)とdmesgには出てる
kernel 2.4.22で,dmesgには
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63, UDMA(100)
とあるんだけども。


187 :login:Penguin:04/01/20 02:51 ID:W3E7xBCZ
Model=WDC WD740GD-00FLA0, FwRev=21.08U21, SerialNo=WD-WMAKE1006441
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=145226112
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
Timing buffer-cache reads: 2104 MB in 2.00 seconds = 1052.00 MB/sec
Timing buffered disk reads: 178 MB in 3.01 seconds = 59.14 MB/sec

Model=ST3120026AS, FwRev=3.05, SerialNo=3JT0LQ15
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:
Timing buffer-cache reads: 2116 MB in 2.00 seconds = 1058.00 MB/sec
Timing buffered disk reads: 74 MB in 3.00 seconds = 24.67 MB/sec


Seagageだめぽ

188 :login:Penguin:04/01/20 06:04 ID:/aP5txjp
# /sbin/hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.06 seconds =120.75 MB/sec
Timing buffered disk reads: 64 MB in 2.11 seconds = 30.33 MB/sec
# cat /proc/ide/hda/model
ACCUSYS ACS7500 1.2


189 :login:Penguin:04/02/01 19:56 ID:AMl1hFRp
Model=Maxtor 6Y120L0, FwRev=YAR41BW0, SerialNo=Y3JAZLLE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=240121728
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):

* signifies the current active mode

Timing buffer-cache reads: 3152 MB in 2.00 seconds = 1576.00 MB/sec
Timing buffered disk reads: 158 MB in 3.01 seconds = 52.49 MB/sec


190 :login:Penguin:04/02/27 01:20 ID:UUOmZDvD
/dev/hdb:

Model=IBM-DTLA-307020, FwRev=TX3OA50C, SerialNo=YHDYHT6F813
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=40188960
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:

Timing buffer-cache reads: 2892 MB in 2.00 seconds = 1446.00 MB/sec
Timing buffered disk reads: 106 MB in 3.03 seconds = 34.98 MB/sec


191 :login:Penguin:04/02/27 01:36 ID:JZQi2dgV
/dev/sda:
Timing buffer-cache reads: 656 MB in 2.01 seconds = 326.58 MB/sec
Timing buffered disk reads: 48 MB in 3.02 seconds = 15.90 MB/sec
USB接続のディスク
本体にUSB1.1用ポートもあるが、恐くて試す気にはならない

192 :login:Penguin:04/03/20 23:16 ID:q8sPqx2g
/dev/hda:

Model=ST3120026A, FwRev=3.16, SerialNo=3JT0HTQN
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234375000
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

/dev/hda:
Timing buffer-cache reads: 2368 MB in 2.00 seconds = 1184.18 MB/sec
Timing buffered disk reads: 168 MB in 3.02 seconds = 55.58 MB/sec


105 KB
■ このスレッドは過去ログ倉庫に格納されています

★スマホ版★ 掲示板に戻る 全部 前100 次100 最新50

read.cgi ver 05.04.00 2017/10/04 Walang Kapalit ★
FOX ★ DSO(Dynamic Shared Object)